TR10 – Quality factor
Evaluate how a wind farm’s remuneration will be affected at the 5, 10 and 15-year mark of operation. The TR10 module is a unique tool for calculating the quality factor of operating turbines according to the German standard: Technische Richtlinien für Windenergieanlagen Teil 10 (TR10), rev. 0. The module is an add-on to Performance Check.
-
Easy data import
Both SCADA production data, log status files as well as electricity production data are easily imported -
Correct Categorization
Each 10-minute production data can be quickly categorized according to TR10 -
Site Yield & Quality Factor
Calculate the site yield and quality factor, as mandated by FGW. -
Documentation
Generate detailed reports, ready to be send as complete documentation -
Certification
The evaluations of WTGs with availability above 98% , resp. between 97% and 98% according to the TR10, rev.0 are certified by TÜV SÜD
Easy data import
SCADA production data and log status files can be imported from almost any wind turbine manufacturers SCADA system.
The TR10 module also include advanced features for importing electricity production data and Einspeisemanagement data (EinsMan).
Correct Categorization
The in-built tools in the TR10 module will intelligently assist you to setup and categorizing your data in compliance with the requirements defined in the TR10 guideline, rev. 0.
Site Yield & Quality Factor
windPRO can calculate the site yield and quality factor with either the simplified or detailed methodology depending on the availability of the WTG.
A TR10 specific temporal availability is calculated determining the method for calculating the site yield. In the end, the quality factor can be determined as the ratio of the site yield and the FGW-published reference yield of a turbine.
Documentation
Once the site yield and quality factor calculations have been completed, the many results of the calculation steps as well as the data basis and processing can be documented in a pdf report. The report fulfills all documentation requirements in the TR10 chapter 8 and the annex, including the attestation for the grid operator.
Certification
The evaluations of WTGs with availability above 98% , resp. between 97% and 98% according to the TR10, rev.0 are certified by TÜV SÜD.
To use the TR10 module, users will also need a license to the BASIS and PERFORMANCE CHECK modules. When wind data from met masts or online data sources are needed, a license to the METEO modules will also be required.